Requirements For The Control System Of The Hair Planting Machine

The speed requirement of the hair planting machine at that time was generally 500-1000 hole minutes; 100-2000 processing graphic files can be called, and 10-100000 holes can be entered; Support U disk function, can copy and process files between machines can be easily completed, support handheld box operation, with password protection function.

Generally speaking, there are two operation modes of data processing of the hair planting machine, namely instruction and correction. The system has an intuitive processing status display system, so that the operator can quickly understand the processing process and make adjustments at any time. It has the function of adding, correcting, inserting and deleting data to facilitate the treatment of porosity deviation, porosity, leakage and other problems.

For some rule graphics, such as a row of regular holes, the distance is the same, perhaps one part and another part are the same, only the orientation is different, and then some special functions can be used to quickly generate the required data. These functions include hole division, imitation, translation, and generation of common techniques.

Through the function of fire cave, the law of cultivation and drilling can be quickly generated. The imitation function supports the imitation of the entire machining hole orientation and part of the machining hole orientation. It does not require processing data from scratch. It has the function of translation. It is able to accurately translate and process the cultivation holes of the product as a whole without any manual correction of the data. Simple and convenient operation.