What Is The Operating Procedure Of The Hair Planting Machine?

a. The regulator outputs 200 volt AC to provide a 100 kV transformer, one end of the transformer is grounded, and the other end is connected to the screen inside the wooden box.
b. Put the barrel containing the slurry in the mixing barrel, then tighten the lid of the barrel, then connect the air source and the spray gun, and then open the air source, and the electric fan blade in the shilling mixing barrel will stir the glue evenly.
c. Put the rubber parts that need to be processed into the glue mold, then put them into the extraction box, open the spray box, spray a lot of glue on the glue parts, and then take the rubber pieces out of the glue mold and put them on the pendant stick.
d. Put the wooden stick into the wool planting box, step on the switch, connect the power supply, and make the screen suck up the fluff under the high pressure of static electricity. Then put the part that needs to be planted downwards and keep swinging against the flutus, so that the fluff can reach an average and sufficient adsorption of the rubber for a period of time.
e. Put the wool-planted rubber pieces and wooden sticks into the furnace and dry the glue.
f. Take out the wooden stick from the furnace, and then take out the rubber piece from the wooden stick and put it away, and after the rubber part cools to normal temperature, start to liquidate the appearance of the planting wool.